The pressure cold water equipment with hot water generator is equipped with the following components:
Stainless steel hood as standard.
Vertical boiler with double spiral, seamless, with a stop device through injection cutoff.
Photoelectric flame control that blocks the machine in case of leak or combustion failure.
Stop for micro leaks.
Independent burner with a delayed start of the machine after 6 seconds.
Three-piston ceramic pressure pump at 1450 rpm and 230-440 V electric motor mounted on bearings and thermal protection.
Safety valve and pressure gauge on the pump.
Detergent regulation valve, pressure gauge, and water and diesel filters, visible oil control from the outside.
Flow switch and thermostat for regulation and flame control (30ºC-100ºC).
Diesel tank of 23 l.
Supply water tank with automatic filling float.
10 m hose, lance, and pressure gun.
TST: Timed total stop (adjustable 0 to 30 sec.)
Total machine stop after 3 seconds of inactivity.
Burner stop due to lack of diesel.
Optional:
Anti-scale device.
Total stop device due to lack of water supply.
½ cut solenoid valve.
Do you want information about this product?
Contact us, and we will answer all your questions.
